Programs; Registering A Program - Ricoh Aficio 3224C Operating Instructions Manual

Configuring/Registering Scan Settings

Programs

You can register frequently used set-
tings in the machine memory and re-
call them for future use.
Note
❒ You can register up to 10 programs
for the scanner mode.
❒ You can use the settings registered
in program No.10 as the initial
mode by selecting [Program No.10]
in [Change Initial Mode] of [Scanner
Features].
❒ Programs are not deleted by turn-
ing the power off or by pressing
the { { { { Clear Modes} } } } key. They are de-
leted only when you delete them
or overwrite them with another
program.
❒ The setting which can be regis-
tered in a program are as follows:
7 the scan settings, 1 sided/2 sided
original, Top to Top/Top to Bot-
tom, Last Page, Divide, Original
F e e d
Batch/SADF, and Stamp.

Registering a Program

A A A A
Make the settings you want to
register in the initial display of
the scanner mode.
B B B B
Press the { { { { Program} } } } key.
78
T y p e , F i l e T y p e ,
C C C C
m Register].
m m
Press [m
D D D D
Press the program number you
want to register.
Note
❒ Program numbers with m al-
ready have settings in them.
E E E E
Enter the program name with the
soft keyboard that appears on the
display panel.
Note
❒ You can enter up to 40 charac-
ters.
❒ If it is not necessary to enter the
program name, proceed to step
F
.
F F F F
Press [OK].
When the settings are successfully
registered, m appears on the left
side of the registered program
AGV001S
number and the program name ap-
pears on the right side. The display
returns to the initial display after a
moment.