Placing Originals - Ricoh Aficio 3224C Operating Instructions Manual

Appendix

Placing Originals

To correctly display the top/bottom orientation of the scanned original on a cli-
ent computer, the placement of the original and the settings made on the control
panel and scanner driver must match.
There are two orientations for placing the original. See the table below.
Note
❒ Normally, an original is
used to make original orientation easy to understand. If the actual shape of
the original is different, the combination of original orientation and the orien-
tation specified on the control panel or scanner driver does not change.
An original to be scanned
Decide the placement method.
Place the original.
(There are two original orienta-
tions.)
When scanning using
the e-mail function, the
10
Speci-
Scan to Folder func-
fy the
tion, the Store function,
orien-
or the delivery scanner
tation.
function
(Specified on the con-
trol panel screen)
When scanning using
the TWAIN scanner
function
(Specified in the Scan-
ner Control dialog box)
108
or , but in the table below, a square original is
Exposure glass
Place the Place the
original so original so
that the top that the top
edge touches edge touches
the top left of the rear of the
the exposure exposure
glass.
*1
glass.
ADF
Place the top Place the
edge of the original so
original first. that the top
*1 edge touches
the back of
the ADF.