Ricoh Aficio 3224C Operating Instructions Manual page 97

Message
Sending the data has failed. To con-
firm the result, check [Scanned Files
Status].
The destination list has been updated.
Specified destination(s) or sender's
name has been cleared.
The E-mail address entered is not cor-
rect. Please re-enter.
The entered path is not correct.
Please re-enter.
The specified group contains some
invalid destination(s). Do you want to
select only valid destination(s)?
Transmission has failed. Insufficient
memory in the destination hard disk.
To check the current status, press
[Scanned Files Status].
Updating the destination list...
Please wait. Specified destination(s)
or sender's name has been cleared.
Updating the destination list has
failed. Try again?
You do not have the privileges to use
this function.
When a Message Is Displayed
Causes and solutions
While a file was being sent, a net-
work error occurred and the file
could not be sent correctly. Try the
operation once more.
If the message is still shown, the net-
work may be crowded. Consult the
network administrator.
If multiple files were sent, use the
Scanned Files Status screen to check
for which file the problem occurred.
See p.28 "Checking the E-mail Re-
sults", p.40 "Checking the Scan to
Folder Results", or p.63 "Checking
the Status of Delivery".
A specified destination or sender's
name was cleared when the destina-
tion list in the delivery server was
updated. Specify the destination or
sender's name again.
Make sure the e-mail address is cor-
rect, and then enter it again.
Confirm the destination computer
and the path, and then enter it again.
The specified group contains some
destinations for sending by e-mail
and some destinations for sending
by Scan to Folder. To select destina-
tions for sending by email, press [Se-
lect] for the message displayed on
the e-mail screen. To select destina-
tion for sending by Scan to Folder,
press [Select] for the message dis-
played on the Scan to Folder screen.
Transmission has failed. There was
not enough free space on the hard
disk of the SMTP server, FTP server,
or client computer at the destination.
Allocate sufficient space.
If a destination or sender's name was
already selected, re-select it after this
message disappears.
Check whether the server is connect-
ed.
The machine has not been set to al-
low you to use the function. Consult
an administrator.
8
89