For A Network Twain Scanner - Ricoh Aficio 3224C Operating Instructions Manual

Configuring/Registering Scan Settings
Note
❒ If the final page of a divided
original is blank, you can
skip scanning that page. To
do this, select [1 Side] in [Last
Page] in [2 Sided Original]. To
scan the blank page, click [2
Sides]. For details, see p.72
"One-sided original/Two-
sided original selection".
Specifying Stamping
A To stamp scanned originals,
press [Divide/Stamp], and then
[Stamp].
Note
❒ Last pages are stamped even
if you selected not to scan the
last page.
❒ Stamping may continue if
scanning is interrupted, de-
7
pending on the cause of in-
terruption.
❒ Replace the stamp cartridge
when the stamp begins to
fade. For details, see "Trou-
bleshooting", General Settings
Guide.
B Press [OK].
C C C C
Press [OK].
Note
❒ The current settings are displayed.
74

For a Network TWAIN Scanner

When using the network TWAIN
scanner, make the setting using the
TWAIN Driver.
A A A A
Open the Scanner Properties dia-
log box.
Reference
p.66 "Scanning Originals"
B B B B
Select the position from the [Docu-
ment:] list in the [Document] area.
C C C C
Select [ / ] or [
the [Orientation:] list.
Reference
p.108 "Placing Originals"
D D D D
When the originals are placed in
the ADF, select [Simplex] or [Du-
plex] in the [Side:] list.
Note
❒ Originals of different sizes are
scanned differently, depending
o n t he settings. See. p.110
"Scanning Documents of Differ-
ent Sizes".
/ ] from