Table of Contents
Advertisement
12. JAM DISPLAY
12.3.11
Controller JAM
A. Detection timing
Type
Detection of
• A duplex print job is sent with the number of pages that goes beyond the maxi-
controller JAM
• When trying to feed duplex media though there is no media to be fed to the
• When printing is directed with the duplex print unit selected as a media source
• While two sheets of media are in the printer, printing is directed with normal
• In duplex printing, a size error occurs.
B. Action
Print control board (PRCB)
Step
1
Check printer driver settings.
2
Change PRCB.
3
Change MFPB.
200
mum number of pages allowed to be in the printer for the selected media type.
duplex print unit.
and an exit media set to be fed to the duplex unit.
media feed settings other than a duplex media feed setting.
Relevant electrical parts
Action
Field Service Ver. 1.1 Jun. 2010
Description
MFP board (MFPB)
WIRING DIAGRAM
Control signal
-
-
-
Location (electri-
cal component)
-
-
-
Advertisement
Table of Contents
