Table of Contents
Advertisement
6. FIRMWARE REWRITING
5. The list of printer drivers is displayed. Select the appropriate connection for the environ-
ment where the printer is being used.
• For a network connection: Select "Network port."
See P.31
• For a local connection: Select "Local port."
See P.34
• When specifying the IP address of the printer: Select "Printer IP address."
See P.35
NOTE
• If you select "Network port" or "Local port", make sure that the printer driver has
been installed.
• If you select "Printer IP address", the firmware can be updated even if a printer
driver is not already installed.
30
Field Service Ver. 1.0 May 2010
A121F2E538DA
Advertisement
Table of Contents
