Printer Monocolor: Uneven Image - Konica Minolta d-Color MF3000 PF-P08 Service Manual

16. IMAGE QUALITY PROBLEM
16.2.23

Printer monocolor: uneven image

A. Typical faulty images
B. Troubleshooting procedure
Step Section
1 Toner cartridge
2 PH unit
3 Toner cartridge
4 Imaging unit
5 Transfer roller
6 Fuser unit
7
246
Check item
The toner cartridge of every color
is surely installed.
The PH unit is surely installed.
There is any stain or breakage on
the drive section of the toner
cartridge.
There is any stain, damage or
abrasion on the PC drum.
There is any stain, damage,
deformation or abrasion on the
transfer roller.
There is any stain, damage,
deformation or abrasion on the
roller and drive section of the
fuser unit.
The problem has been eliminated
through the check of step 6.
Field Service Ver. 1.1 Jun. 2010
Result Action
NO Re-install it.
NO Re-install it.
YES Clean/replace the toner cartridge.
YES Replace the imaging unit.
YES Replace the transfer roller.
YES Replace the fuser unit.
NO Replace the image transfer belt
unit.
A02EF4C525DA