Table of Contents
Advertisement
Field Service Ver. 1.1 Jun. 2010
Two-way communication
Step
11 Enables/disables some special warning and report functions
1. Select [Service Mode] [CS Remote Care] [CSRC Settings] [Switches Settings], and set
whether or not to enable each function.
See P.167
12 Executing the initial transmission
1. Select [Service Mode] [CS Remote Care] [Subscribe].
2. Select [Yes], and touch [OK] to start initial transmission.
3. When the machine is properly connected with the center, the "Completed" message will be
displayed.
*1 Heartbeat is a feature that uploads a Heartbeat file to the registered web server at a
specified interval to report that the device is operating. Heartbeat files include total
counter and status information.
One-way communication
Procedure
10. SERVICE MODE
163
Advertisement
Table of Contents
