Table of Contents
Advertisement
16. IMAGE QUALITY PROBLEM
16.2.15
Printer monocolor: uneven density in main scan direction
A. Typical faulty images
B. Troubleshooting procedure
Step
Section
1
Imaging unit
2
3
PH unit
4
Transfer roller
5
Transfer belt unit Transfer belt unit makes positive
6
7
238
Check item
The surface of the PC drum is
scratched.
Dirty on the outside.
The surface of the PH window is
dirty.
Check that the spring does not
come off during the pressure oper-
ation of the transfer roller.
contact with plates on rails.
Is abnormality found in the cam
gear?
The problem has been eliminated
through the checks of steps up to 6.
Field Service Ver. 1.1 Jun. 2010
Result
Action
YES Change imaging unit.
YES Clean.
YES Clean with cleaning jig.
NO
Correct.
Change transfer roller unit.
NO
Check and correct contacts.
YES Change image transfer belt unit.
NO
Change PH unit.
Change high voltage unit.
A02EF4C521DA
Advertisement
Table of Contents
