Chapter 4: Installing the Tiller Pilot
Pedestal socket mounting
If you need to raise the height of the mounting socket to keep the tiller pilot
horizontal, use a Raymarine pedestal socket assembly.
Identifying the correct pedestal socket
1. Clamp the tiller on the boat's center line.
2. Establish the standard control dimensions A and B.
3. With the tiller pilot horizontal, measure dimension G.
4. Select the appropriate pedestal socket assembly from the table.
Dimension G
64 mm (2.5 in)
102 mm (4.0 in)
114 mm (4.5 in)
127 mm (5.0 in)
140 mm (5.5 in)
153 mm (6.0 in)
Mounting the pedestal socket
1. Mark the mounting ring's position on the cockpit seat or counter.
2. Ensure that control dimensions A and B are correct.
L
Pedestal socket length L
Standard dimension
38 mm (1.5 in)
50 mm (2.0 in)
64 mm (2.5 in)
76 mm (3.0 in)
89 mm (3.5 in)
G
D3197-2
Part no.
-
D026
D027
D028
D029
D030
39