Inserting A Gold Chart Card - Raymarine RC400 Owner's Handbook Manual

Chapter 2: Installation
WARNING:
When using Alkaline cells, set the battery type switch to ALKALINE
so that the cells are not charged when the NMEA cord is connected.
Charging Alkaline cells may cause excessive heat and could result in
cell leakage or explosion causing damage or injury.

Inserting a Gold Chart Card

Charts with detailed information for the area you wish to navigate are
available on Navionics Gold Chart cards, each of which can store up to 20
charts in an electronic format. See Using Navionics Gold Chart Cards on
page 29 for details.
➤
To insert a Gold Chart card, refer to Figure 2-4 :
1. Check that you are using the correct Gold Chart card for the desired
2. Remove the battery tray as described above and in Figure 2-2 .
3. Insert the card as shown in Figure 2-4 with the smooth edge of the
4. Gently press the card home. If inserted correctly the words BAT-
5. Replace the battery tray and tighten the retaining screws.
Figure 2-4: Inserting the Gold Chart Card
area.
card outermost and the card label up.
TERY TYPE on the label behind the card will be visible.
13
D6522-1