Raymarine RC400 Owner's Handbook Manual page 38

28
➤
For rapid scale change, press and hold the RANGE IN or RANGE OUT
key.
The distance indicator at the left-hand end of the status bar is updated
whenever you change the chart scale.
➤
To zoom in to a more detailed chart:
1. Use the trackpad to position the cursor in the area you wish to see in
2. If further chart enlargement is available using the current chart card
Chart Boundary -
Indicates further
detail is available inside.
Shown when using
Navionics
3. In normal operation, the unit will allow you to zoom in as far as the
➤
To zoom out to a less detailed chart, press the RANGE OUT key as many
times as desired.
more detail and press the RANGE IN key to zoom in.
The section of the chart around the cursor is enlarged to fill the screen
with the chart showing more detail. The cursor is now positioned in
the center of the screen.
you can press the RANGE IN key to zoom in again, repositioning the
cursor first if needed.
An area of further chart detail is indicated by a box around the area.
®
Gold Chart Card
chart detail allows. By selecting PLOTTER MODE in CHART SETUP you
can "overzoom" beyond that of the chart card and the vessel, way-
points, routes and tracklines will be displayed without cartography.
128 nm
RC400 GPS Chartplotter
D6252-1