Erasing Or (Re)Naming A Route; Route Info - Raymarine RC400 Owner's Handbook Manual

Chapter 5: Operation

Erasing or (re)Naming a Route

A route can be deleted or re-named via the Route List. When deleting a
route, you are prompted to confirm.
➤
To select a route to delete:
1. Select ROUTES, followed by MORE, then ROUTE LIST. The route list is
2. Select ERASE ROUTE.
3. Press ENTER to erase the route from the list. A warning box appears,
4. Press CLEAR three times to return to normal chart operation.
➤
To select a route to (re)name:
1. Select ROUTES, followed by MORE, then ROUTE LIST. The route list is
2. Select NAME ROUTE. and press ENTER.
3. To name or rename a route, use trackpad left/right to select each char-
4. Press ENTER to accept the new name or CLEAR to cancel the opera-
5. Press CLEAR three times to clear the Route List and return to chart

Route Info

A list of the waypoints in your route, their bearing and range, the time
taken to complete and estimated time of arrival (ETA) can be obtained by
using the ROUTE INFO function.
1. Select ROUTES, followed by MORE, then ROUTE LIST. The route list is
2. Select ROUTE INFO. and press ENTER.
displayed with the selected route highlighted.
prompting you to press ENTER to confirm or CLEAR to cancel the
operation.
displayed with the selected route highlighted.
acter to be edited. Use trackpad up/down to scroll through the charac-
ters.
tion.
mode.
displayed with the selected route highlighted.
61