Erasing Waypoints; Moving Waypoints - Raymarine RC400 Owner's Handbook Manual

54

Erasing Waypoints

Note: A waypoint that is the target waypoint or waypoints that are also
used in any saved route(s) cannot be erased. If an attempt is made to
erase a waypoint that is used in a saved route, the warning "WAYPOINT IS
USED IN ROUTE(S) AND CANNOT BE ERASED" is displayed.
➤
To delete a waypoint using the cursor:
1. Place the cursor over the waypoint; see Selecting a Waypoint on page
2. Select WAYPOINT OPTIONS and press ENTER to display the Waypoint
3. Select ERASE WAYPOINT. A warning box appears. Press ENTER to
➤
To delete a waypoint using the waypoint list:
1. Select the waypoint from the waypoint list as previously described.
2. Use trackpad up/down to move through the list to highlight the
3. Select EDIT WAYPOINT and press ENTER to display the Edit Waypoint
4. Select ERASE WAYPOINT. Press ENTER to erase the waypoint.
To return to chart mode, press CLEAR three times.

Moving Waypoints

Any waypoint, except the target waypoint, can be moved. The Waypoint
function bar and cursor are used to move the selected waypoint, or the
waypoint position can be edited.
Note: Take care when editing waypoints as it is possible to move way-
points that are used in routes stored in the Route Database List.
➤
To move a waypoint using the cursor:
1. Place the cursor over the waypoint; see Selecting a Waypoint on page
2. Select WAYPOINT OPTIONS and press ENTER to display the Edit Way-
3. Select MOVE WAYPOINT. The selected (highlighted) function now has
50.
function bar.
erase or CLEAR to retain. If erased, the waypoint list is updated and
the screen is cleared.
The waypoint list function bar is displayed.
desired waypoint.
function bar.
50.
point function bar.
help text appended to it.
RC400 GPS Chartplotter