Raymarine RC400 Owner's Handbook Manual page 105

Chapter 5: Operation
2. Using trackpad left/right, select ARCHIVES.
3. Using trackpad left/right, select MORE... and then WAYPOINT ARCH.
Figure 5-16: Waypoint Archive List
4. A list of archived waypoint sets is displayed.
Note: When loading waypoint sets onto the chartplotter, you can either
add to the waypoints currently loaded on the chartplotter or replace the
waypoints currently loaded.
LIST.
WAYPOINTS ARCHIVES
• To load a waypoint set from the archive:
Use trackpad up/down to select the waypoint set you wish to
load, use the trackpad left/right to select either ADD WAYPOINTS
or REPLACE WAYPOINTS and press ENTER.
D6255-1
D6262-1
95