Inserting A Gold Chart Card; Removing A Gold Chart Card - Raymarine RC435 Owner's Handbook Manual

30

Inserting a Gold Chart Card

CAUTION:
To prevent the ingress of water and consequent damage to the unit,
ensure that the chart card door is firmly closed. This can be
confirmed by an audible click.
➤ To insert a Gold Chart card, refer to Figure 3-2 :
1. Check that you are using the correct Gold Chart card for the desired
area.
2. Open the chart card door on the right-hand side of the unit.
3. Insert the card as shown with the smooth edge of the card outermost.
4. Gently press the card home. If inserted correctly the card release but-
ton will move outwards as the card is inserted. If this is not the case,
flip the card and retry.
5. To prevent the ingress of water, close the chart card door and press
firmly until an audible click is heard.

Removing a Gold Chart card

CAUTION:
DO NOT use a metallic instrument, e.g. a screwdriver or pliers, to
aid removal, as doing so can cause irreparable damage.
➤ To remove a Gold Chart card:
1. Open the chart card door.
2. Gently press the card release button.
3. Grip the card and pull to remove it from its slot.
4. To prevent the ingress of water, close the chart card door and press
firmly until an audible click is heard.
RC435 and RC435i Chartplotters