Raymarine RC400 Owner's Handbook Manual page 59

Chapter 5: Operation
5. To place a waypoint at a known position (lat./long):
6. To place a waypoint using the Waypoint List:
Figure 5-1: Waypoint List Display
7. Select MAKE NEW WAYPOINT.
To return to chart mode, press CLEAR twice.
Select PLACE WPT AT POS. A box appears in the center of the screen
with the current cursor position (lat./long). Use the trackpad left/right
to select the value and the trackpad up/down to change the value.
Press ENTER to place the waypoint or CLEAR to cancel.
Select WAYPOINT LIST. The Waypoint List and associated function
Soft Keys are displayed:
The waypoint is placed at the current vessel position or, if a GPS fix is
not available, the cursor position. The new waypoint is added to the
Waypoint List and named with the next available number.
The EDIT WAYPOINT function is now highlighted allowing you to
change the waypoint name, symbol or position. See page 52 for
detailed information.
D4991-3
49