Raymarine RC400 Owner's Handbook Manual page 74

64
2. Press ENTER; the Route Leg functions are displayed:
3. Select INSERT WAYPOINT.
4. Using the trackpad, move the cursor to the desired position and press
Note: If you move the cursor over an existing waypoint, the option to use
this waypoint appears.
5. Press CLEAR again to remove the function bar and route leg data.
Note: If you already have 50 waypoints in your route the system will not
allow you to add any more and a warning message will be displayed.
➤
To remove a waypoint from the route using the cursor:
1. Place the cursor over the waypoint.
2. Select WAYPOINT OPTIONS; the Waypoint functions are displayed.
3. Select REMOVE WAYPOINT; the waypoint is removed from the route
Note: The waypoint is erased if the route is not saved but remains on
screen if the route is saved.
The cursor now controls the route leg which is connected to the exist-
ing waypoints on either side of the cursor by a dotted line.
ENTER to place the new waypoint and return to normal cursor opera-
tion or CLEAR to cancel the operation.
The waypoints in the current route are re-numbered to identify the
new positions.
and the remaining waypoints in the current route are renumbered
accordingly.
RC400 GPS Chartplotter