Follow A Route; Reverse A Route - Raymarine RC400 Owner's Handbook Manual

66

Follow a Route

Note: If a route has been reversed or if a route on screen was being fol-
lowed, but stopped before completion, the target waypoint (outlined by a
square box) may be different to when the route was created. The target
waypoint should always be checked before initiating a FOLLOW ROUTE.
➤
To follow the current route:
1. Press and release the GOTO/MOB key. The GoTo/Follow functions
2. Select FOLLOW ROUTE.
The vessel's current position becomes the origin and the first waypoint in
the current route becomes the target waypoint. A dotted line connects the
vessel's current position to the target waypoint. This line remains fixed
on screen as the vessel moves. The function bar is removed.

Reverse a Route

This option enables a return route to be generated from an existing route
which is then followed in reverse order, with waypoints renumbered
accordingly.
➤
To reverse the current route:
From the normal chart display:
1. Press ENTER to display the primary function bar, then select ROUTES,
—or—
2. Move the cursor over a route leg until the ROUTE OPTIONS function is
The current route is reversed on the screen and the waypoints are
renumbered.
➤
To follow the reversed route:
1. Press and release the GOTO/MOB key. The GoTo/Follow functions
2. Press FOLLOW ROUTE.
The vessel's current position becomes the origin and the first waypoint in
the reversed route becomes the target waypoint. The function bar is
removed.
are displayed. Alternatively, place the cursor over a route leg until the
Route functions are displayed.
followed by MORE, then REVERSE ROUTE.
displayed. Press ENTER to display the options and select REVERSE
ROUTE.
are displayed.
RC400 GPS Chartplotter