Table of Contents
Advertisement
4.8.3.
System Reboot
On the Switch Tools Configuration Menu, pressing "R" opens the System Reboot
Menu screen as shown in Fig. 4-83. On this screen, you can reboot this Switching
Hub.
PN28168 Local Management System
Switch Tools Configuration -> System Reboot Menu
Reboot Status:
Reboot Type:
Reboot Timer:
Time Left:
-------------------------------- <COMMAND> -----------------------------------
Set Reboot [O]ption
Start [R]eboot Process
Set Reboot [T]imer
[Q]uit to previous menu
Command>
Enter the character in square brackets to select option
Screen Description
Reboot Status
Reboot Type
Reboot Timer
Time Left
Stop
Normal
0 seconds
N/A
Fig. 4-83 System Reboot
Displays whether or not the reboot command is executed.
Stop
Displays that the reboot command is not executed.
In Process
Reboot in process or in waiting status set by the reboot
timer.
Displays the reboot type. The factory default setting is "Normal."
Normal
Normal reboot is executed.
Factory Default
All settings are reset to factory default.
Factory Default
All settings except the IP address are reset to factory
Except IP
default.
Displays the time between execution of the reboot command and actual
reboot.
The factory default setting is 0 second.
Displays the time left before the system is actually rebooted after execution of
the reboot command. A key entry refreshes the screen display, allowing you to
check the elapsed time.
172
Advertisement
Table of Contents
