Display Of Neighbor Table - Panasonic PN28168 Operation Manual

4.5.11.a. Display of Neighbor Table
On the LLDP Configuration, pressing "E" opens the Neighbor Table screen, as
shown in Fig. 4-32. On this screen, you can display the Neighbor Table.
PN28168 Local Management System
LLDP Configuration -> Neighbor Table
Total Neighbors:
No Chassis ID
--- ----------------- ----------------- --------------- ----
1 xx:xx:xx:xx:xx:xx xx:xx:xx:xx:xx:xx 0.0.0.0
-------------------------------- <COMMAND> -----------------------------------
[N]ext Page
[P]revious Page
Command>
Enter the character in square brackets to select option
Screen Description
Total Neighbors Displays the number of entries recorded in the Neighbor Table.
No Displays the entry number.
Chassis ID Displays the Chassis ID for each entry.
Port ID Displays the port ID for each entry.
Mgmt IP Address Displays the IP address for each entry.
Port Displays the port number that received LLDP frames.
Available commands are listed below.
N Display the next page.
Press "N" to display the next page.
P Display the previous page.
Press "P" to display the previous page.
D Display detailed information of each entry.
Press "D" to display detailed information of the entry. For configuration details, refer to the
next section (4.5.11.b).
Q Return to the parent menu.
1
Port ID
[D]etail
[Q]uit to previous menu
Fig. 4-32 Display of Neighbor Table
82
Mgmt IP Address Port
1