Table of Contents
Advertisement
Fig. 2
REMOVAL / REFITTING OF THE FUELBED CERAMICS
a)
Fit the rear fuelbed section to the combustion chamber, locating behind
the support bracket as indicated below in Fig. 3
Fig. 3
b)
Fit the front section of the fuelbed to the combustion chamber, locating
behind the front casting as shown overpage in Fig. 4
Supplied By www.heating spares.co Tel. 0161 620 6677
Fit rear section of
fuelbed behind sup-
port bracket as
shown
6
Advertisement
Table of Contents
