Table of Contents
Advertisement
4.3
REMOVING THE GAS VALVE FROM THE FIRE
a)
Disconnect the appliance from the gas supply.
b)
Remove the upper canopy as shown in section 4.1
c)
Remove the left hand side panel, by unscrewing the rear panel fixing
screws, then the base panel retaining screw, as shown below in fig. 12
Fig. 12
Front retaining
screw on the
underside of
the leg support
bracket
c)
Disconnect the pipes to the control valve and the control valve locknut
as shown below in Fig. 13
Fig.13
Control Valve
Locknut
Supplied By www.heating spares.co Tel. 0161 620 6677
Rear side panel
retaining screws
18
Gas Inlet Pipe
Main Supply Pipe
Pilot Pipe
Advertisement
Table of Contents
