Table of Contents
Advertisement
EMI Receiver Instructions for Use
In the spectrum analyzer mode, the interface is saved in the form of screenshots, after [System], click [Save]
[Storage], click [Screenshot], and click [Save to Flash]. The save format is only .png.
6. Precautions for using the instrument
When using the instrument, pay attention to electricity safety.
After the instrument is turned on, it needs to warm up for 25 minutes. After the system is stable, start measuring.
When the instrument is conducting a conduction test, when using it with an external LISN, pay attention to the order of the test steps, note
Pay attention to electricity safety.
When using the instrument, pay attention to the issue of safety grounding, which requires good grounding.
Do not place the instrument in a place exposed to sunlight for a long time after use.
When the instrument is not in use, please disconnect the power supply.
48
Advertisement
Table of Contents
