Saluki SER Series User Manual page 43

EMI Receiver Instructions for Use
5.1.3 Creation and use of limit lines
You can edit and use limit lines yourself for quick measurements, also for list sweeps.
[Meas Setup] menu contains all the operations of the limit line, the menu functions are as follows
The left part is the limit line list that has been created, and the parameters included in the limit line list are
[Name]Limit line name
[Limit] Limit line type, including Upper (upper limit line) and Lower (lower limit line), upper limit line table
Indicates that when the detection result exceeds the limit line, it is qualitatively exceeded, and the lower limit line is just the opposite, lower than the lower limit line
out of bounds
[X coordinate] Horizontal axis display mode, Log means logarithmic display, Line means linear display
[Unit]dBuV
[X axis]Display the absolute frequency value
[Y axis]display relative frequency value
42