Table of Contents
Advertisement
EMI Receiver Instructions for Use
2: Test standard selection. PressÿMeasÿto select the EMC test standard, and use the softkeys on the interface to directly select
Select [Standard], select [GJB151B] in the standard list, select [RE102] in the national military standard list, according to
The DUT requires to select the limit value, for example, select [Ground] limit value, the standard test interface is as follows:
After starting the test, the test curve is shown in the figure below:
Figure 3.16 GJB151B RE102 test interface
27
Advertisement
Table of Contents
