Limit Line Parameters And Operation Steps - Saluki SER Series User Manual

EMI Receiver Instructions for Use

5.1.2 Limit line parameters and operation steps

[Page number] The limit line list displays 12 items per page, and will be displayed in pages after more than 12 items
[Name] The name of the limit line, input from the software disk, after the cursor switches to the name parameter, click on the front panel
[Enter] key can activate/deactivate the software disk
ÿLimitÿ Limit line type definition, upper limit/lower limit
[X coordinate] Linear/logarithmic, currently only supports X coordinate logarithmic unit only supports dBuV unit
[Note] Custom description, the input method is the same as the name
edit line operation
After the instrument is turned on and the system enters the EMI receiver, click [Meas Setup] to enter the limit line editing page,
Specifically: [Meas Setup] → [New], start creating limit lines
The left side is the limit line parameter editing part, and the right side is the shortcut switch and function menu
[Name] Quickly locate the cursor to the name parameter column
[Value] Quickly position the cursor to the first frequency
Figure 5.1 Limit line edit blank page
40