Saluki SER Series User Manual page 4

Anti-static protection
Static electricity will cause damage to the instrument, and the test may be performed in an
anti-static area. Before connecting a cable to an instrument, briefly ground its inner and outer
conductors to discharge static electricity.
Pay attention to handling safety
In order to prevent the instrument from slipping during transportation and causing damage
to the buttons, knobs or interfaces on the panel of the instrument, please pay attention to the
safety of transportation.
General inspection
Check shipping packaging
If the shipping packaging is damaged, keep the damaged packaging and shockproof material
until the shipment has been fully inspected.
If the instrument is damaged due to transportation, the sender and the carrier will contact
each other for compensation. Saluki does not provide free repair and replacement.
Check the whole machine
If there is mechanical damage or missing, or the instrument fails the electrical performance
test. Please contact Saluki Technology Inc. or your distributor.
Check the accessories
Please check the accompanying accessories according to the packing list. If there is any loss
or missing, please contact Saluki Technology Inc.
3