Graco PR-Xv Instructions Manual page 47

9. Select 'HMI_Connection_1' on the 'Step 1/3'
screen. Then select '>' to proceed to the next
screen.
10. Select 'ON' for the 'Override' item on the 'Step 2/3'
screen. Then select '>' to proceed to the next
screen.
11. Select 'Accept' on the 'Step 3/3' screen.
12. Return to the 'Start Center' screen and restart HMI
before HMI IP address setup.
Edit network settings
1. Start PR-Xv control box and select 'Settings' on the
'Start Center' screen.
2. Select 'Network Interface' on the 'Settings' screen.
Operation
47