Table of Contents
Advertisement
HMI Display Operation and Identification
Advanced Setup Screen 3
F
. 29 Advanced Setup Screen - 3
IG
On the Advanced Setup Screen 3, select
display the Advanced Setup Screen 2. Press 'F1' or
select
to display the System Main Screen. Press
'F7' or select
to return to the previous screen.
Press 'F8' or select
Home rate
Click to set the speed of homing for part A and part B.
Enable sequence mode
Green background color indicates sequence mode is
selected. The system runs in sequence mode. In this
mode, the operator can edit the working sequence (The
sequence includes 16 steps maximum. The operator
can edit step 1 to 14, as step 0 and 15 are tied to
pre-charge and depressurization). When the system
works in automatic status, the Customer Controllor can
send 'dispense' signal to start the sequence mode.
32
to
to continue to the next screen.
Check pressure after home
If this function is selected, the system displays green
background color. System pressure will be checked
when the piston is in the home position.
Select work mode
Click to select communication mode, including IO
communication mode and Profinet communication
mode.
Dispense ratio
Click to set the dispense ratio of part A and part B.
Pressure limit
Set the size of metering tube per real situation.
Advertisement
Table of Contents
