Graco PR-Xv Instructions Manual page 46

Operation
4. Select 'Accessible devices in target subnet' on the
'Step 1/4' screen. Then select '>' to proceed to the
next screen.
5. Select 'Start search' on the 'Step 2/4' screen, HMI
will then find PLC in the Net. Select the device with
the IP address you want to change. Then select '>'
to proceed the next screen.
.
46
6. Edit IP address directly on the 'Step 3/4' screen.
Then select '>' to proceed to the next screen.
7. Choose 'Accept' on the 'Step 4/4' screen.
8. Select 'Edit Connections' from the 'Service &
Commissioning' list. Next, touch the middle cycle
to open the whole screen.