Graco PR-Xv Instructions Manual page 40

Operation
15. On the Advanced Screen, select "A Inlet Off", "B
Inlet ON", "B Outlet Off", "B Outlet Off" to open
input and dispense valves of part A and B.
16. Wait for part A and B to dispense in continuous and
stable flow. Then select "A Outlet ON" and "B
Outlet ON" to close the Dispense Valves of part A
and B.
17. Press on the Advanced Screen to display
System Main Screen.
40
18. On the System Main Screen, press
to display setup screens. Press
to go to "Advanced Setup Screen 1" and
press to go to "Advanced Setup Screen 3".
Check Home Speed, Metering tube Size and
Dispense Ratio.
F . 43 Advanced Setup Screen 3
IG
19. Press to display the Reload Setup Screen. Set
and check reload rate of part A and B.
F . 44 Reload Setup Screen
IG