Editing A Waypoint; Change The Default Symbol; Changing The Waypoint Symbol - Raymarine A65 Owner's Handbook Manual

Chapter 3: Working with Waypoints

3.5 Editing a Waypoint

After a waypoint has been placed it can be edited in a variety of ways. You can:
• Change the default waypoint symbols
• Change the waypoint details, such as name or symbol
• Move the waypoint
• Erase the waypoint

Change the Default Symbol

When you add a waypoint to your system it is given the default symbol, the 'X'. If
this is not suitable, you can select an alternative symbol as the default.
To change the default waypoint symbol for all waypoints:
1. Press WPTS/MOB . The waypoint soft keys appear.
2. Press REVIEW & EDIT WAYPOINTS. The Waypoint List appears.
3. Press SELECT DEFAULT WPT SYMBOL. The available waypoint symbols
appear in a box to the right of the Waypoint List.
4. Use the rotary knob or up/down trackpad keys to highlight your selection.
5. Press ENTER to accept or CANCEL to abandon.
6. Press ENTER or CANCEL to clear the Waypoint List.

Changing the Waypoint Symbol

You can change the symbol for individual waypoints. This is particularly useful
when you are managing large numbers of waypoints.
To change an individual waypoint's symbol:
1. Select the waypoint by placing the cursor over it. The cursor turns red and the
action soft keys appear. Proceed to step 3.
or
—
Press WPTS/MOB . The waypoint soft keys appear.
2. Press REVIEW & EDIT WAYPOINTS. The Waypoint List is displayed.
—
53