Table of Contents
Advertisement
Recess installation secured to brackets
The box can be secured to a plate 2 to 30 mm thick.
F
Remove the knockouts shown, as well as those that the wires for the system go through.
G
Fit the plate, keeping the side tabs on the outside of the recess. Insert the terminals into the box's knockouts with the appropriate screws.
H
Tighten the screw and position the terminal extended on the plate. Carry out this operation on both sides.
Page 8 - Manual FA01812-EN - 06/2022 - © CAME S.p.A. - The contents of this manual may be changed at any time and without notice. - Translation of the original instructions
F
G
H
Advertisement
Table of Contents
