CAME XVP F Installation And Configuration Manual page 41

SENSORS
System AUDIO
Date and Time
Network
SIP
Credentials
Access control
Device
Images and logos
Maintenance
Diagnostics
Page 41 - Manual FA01812-EN - 06/2022 - © CAME S.p.A. - The contents of this manual may be changed at any time and without notice. - Translation of the original instructions
Device
Help
MULTIMEDIA
SCREEN SENSORS
PROXIMITY
SCREEN ACTIVATION
LIGHT
STANDBY PULSATION
In this section you can adjust the sensitivity of the proximity sensor.
With low sensitivity a presence is detected close by.
Log out
With high sensitivity a presence is detected at the maximum possible distance.
RTSP
The detection distance partly depends on what is detected and the device's lighting
conditions.
Under [SCREEN ACTIVATION] you can enable/disable the activation of the screen when the device is
approached. If the function is disabled the screen is activated by touch.
Under [LIGHTING] you can set the intensity of the LED crown on the video camera when the device is on
a call.
Under [STANDBY PULSATION] you can activate the fl ashing of the LED crown when the video camera is
on standby.