Technical Data - CAME XVP F Installation And Configuration Manual

Hide thumbs Also See for XVP F:
Table of Contents

Advertisement

Technical data

MODELS
IP protection rating
IK protection rating
Operating temperature (°C)
Storage temperature (°C) *
Current draw in standby mode (mA)
Maximum consumption without electric lock (mA)
Maximum consumption with electric lock (mA)
Power supply (V DC)
PoE power supply
Maximum relay current (A)
Relay maximum voltage (V)
Video standard
Standard wireless
Radio frequency (MHz)
Transmission power (dBm)
Proximity sensor range (cm)
Average life (hours)**
(*) Before installing the product, keep it at room temperature where it has previously been stored or transported at a very high or very low temperature.
(**) The average product life is a purely indicative estimate. It applies to compliant usage, installation and maintenance conditions. It is also infl uenced by other factors, such as climatic and
environmental conditions.
The minimum on temperature from cold is -25°C.
If the temperature of the display glass reaches 80°C when exposed to sunlight, the device's thermal protection is activated. Normal operation is restored only once the glass has
cooled down.
The wall must be perfectly fl at and fl ush with the bottom of the box to reach the specifi ed IP rating.
Page 5 - Manual FA01812-EN - 06/2022 - © CAME S.p.A. - The contents of this manual may be changed at any time and without notice. - Translation of the original instructions
XVP F
XVP S
55
55
08
08
-40 ÷ +50
-40 ÷ +50
-25 ÷ +70
-25 ÷ +70
700
700
1000
1000
1500
1500
12-24 DC
12-24 DC
IEEE 802.3at POE+
IEEE 802.3at POE+
(25.5W)
(25.5W)
1
1
30
30
H.264
H.264
Bluetooth LE 5.0
Bluetooth LE 5.0
2400
2400
0
0
30 ÷ 130
30 ÷ 130
90.000
90.000
Size
127
55
XVP-F
153
50
XVP-S

Advertisement

Table of Contents
loading

This manual is also suitable for:

Xvp s

Table of Contents