CAME XTS 7 WH WIFI Installation And Configuration Manual
Wifi touch-screen speaker video-intercom
Hide thumbs
Also See for XTS 7 WH WIFI:
- User manual (113 pages) ,
- Installation and setting manual (21 pages) ,
- Installation and configuration manual (17 pages)
Subscribe to Our Youtube Channel
Related Manuals for CAME XTS 7 WH WIFI
Summary of Contents for CAME XTS 7 WH WIFI
- Page 1 Wifi touch-screen speaker video-intercom FA01680-EN XTS 7 WH WIFI XTS 7 BK WIFI XTS 7 WH WFBF EN English INSTALLATION AND CONFIGURATION MANUAL...
-
Page 2: General Precautions
• Only use this product for its intended purpose. Any other use is hazardous. Came S.p.A. is not liable for any damage caused by improper, erroneous or unreasonable use. • Only use soft, dry or slightly damp cloths to clean the device. Do not use any chemical products. • Do not obstruct the ventilation or heat dissipation vents or slots. -
Page 3: Description Of Parts
DESCRIPTION Full-touch speaker video-intercom for the X1 wall- hung system. Description of parts Front view 1 Signaling LED 2 Speaker 3 Touch-screen display 4 Microphone. Rear view 5 Housing for the not-included Micro SD card (for future use). 6 Reset button. When pressed it reboots the device; this operation DOES NOT require any deleting of programming. -
Page 4: Technical Data
Technical data Type XTS 7 WIFI local power supply (V DC) 14 to 18 Maximum draw (mA) Current draw in stand-by mode (mA) Stocking temperature °C* -25 to +70 Operating temperature °C 0 to +40 Protection rating (IP) Capacitative TFT Touch-screen Display (pixels) 1024 x 600 Standard wireless (IEEE) 802.11b, 802.11g, 802.11n... -
Page 5: Installation
INSTALLATION... - Page 6 To make the device's installation more solid, use the supplied screws and dowels to fasten the frame to the wall. Notes on installing indoor receivers connected to the WiFi network Install the indoor receiver: away from any metal objects that may interfere with the signal, or from any devices that generate magnetic fi...
-
Page 7: Examples Of Installation
Examples of installation Installing four indoor receivers in one home. The WiFi connection needs only to be active on one indoor receiver. The Apps are associated to the indoor receiver that has an active Wifi connection. VAS/101 VAS/101 VAS/100.30 VCM/1D VCM/2D UTP/CAT 5 2x1.5mm... - Page 8 Device installed in several homes with diff erent types of power-supply units. In a home where several indoor receivers are installed, the WiFi connection need only be active on one of the receivers. The Apps are associated to the indoor receiver that has an active Wifi connection. VAS/101 VAS/101 VAS/101...
- Page 9 Installed at a duplex home, where each home has a device The Apps are associated to the indoor receiver that has an active Wifi connection. XDV/304 VAS/100.30 VCM/1D VCM/2D UTP/CAT 5 2x1.5mm ≤ 100 ≤ m 100 ≤ m 100 –...
-
Page 10: Advanced Settings
Confi gura on X2 intercom system. Wrong settings Network may cause partial or even total malfunctions; that is why the CAME Connect editing of some parameters is Mul media allowed only after entering the installer password; the default Creden als password is 112233). - Page 11 Confi guration X2 A This button is for sending the SN (serial number) to the Pcs/Xip Send SN software during the programming steps. Manual programming B This button takes you to manual programming of the device. complete manual programming procedure for the call is printed in the literature that is issued with the indoor receivers.
- Page 12 I Once you have chosen the connection mode, the button is Type of connec on WiFi WiFi for selecting and setting up a Wifi network. Enabled Confi gure WiFi Every 30 seconds the device scans Mode DHCP for available networks. IP address Netmask Save...
- Page 13 VoIP remote control of the video- Keycode intercom call. Enable connec on The factory settings require that the Internet service provider connection to CAME Connect be enabled. Status The CAME Connect connection must be active to receive calls over the App.
-
Page 14: Automatic Door Opener
Automatic door opener This function, which is especially useful for businesses, lets you automatically open the entrance once the call- button is pressed on the entry panel. The activation of this function can be programmed to schedule time slots and days of the week. A Touch the button to add a new time slot. - Page 15 For editing the selected 08:30 12:30 element. For eliminating the selected 13:30 18:30 element. Touch the Back button to return to New me-slot the list of confi gurable parameters. Delete all 19:02 Thursday 01 Feb 2018 Info Back Home Confi guring the user interface This section is for customizing the appearance of the homepage.
-
Page 16: Maintenance
Touch each of the empty sections and use the drop-down menu to Number of frames: select the content that you want to assign to the section. Empty Empty Save the setting by touching the Save button. Empty Se ngs Save Save 19:02 Thursday... - Page 17 SETTINGS AVAILABLE ONLY FROM WEB PAGE The web pages, in addition to allowing the confi guration of most of the parameters that can be set by the interface of the receiver, allow provide some additional functions illustrated in this section. Type the address of the device in the browser address bar XTS 7 (Chrome, Firefox, Safari).
-
Page 18: Node Status
Node status Help Exit On master receivers, through this System PARAMETERS NODES STATUS window it is possible to view the connection status of the SIP nodes. Date and Time B Choose the type of SIP nodes for NODES TYPE Network which you want to view the status. -
Page 19: Password Change
Password change Maintenance Help Exit In this window it is possible to System UPDATE... CHANGE PASS... CONFIGUTION... change the password used to access. Date and Time PASSWORD Network NEW PASSWORD Credentials IP video cameras CONFIRM NEW PASSWORD Voicemail Device Save Cancel Maintenance Diagnostics... - Page 20 CAME S.p.A. Via Martiri Della Libertà, 15 31030 Dosson di Casier - Treviso - Italy tel. (+39) 0422 4940 - fax. (+39) 0422 4941 info@came.com - www.came.com...
Need help?
Do you have a question about the XTS 7 WH WIFI and is the answer not in the manual?
Questions and answers