Table of Contents
Advertisement
Network
NETWORK
Mode
IP address
Netmask
Gateway
DNS
MAC address
Save
Page 18 - Manual FA01812-EN - 06/2022 - © CAME S.p.A. - The contents of this manual may be changed at any time and without notice. - Translation of the original instructions
From [MODE] choose the type of addressing, either [DHCP] or [STATIC].
DHCP
The device's IP address is assigned by the DHCP server.
If the device is confi gured as the MASTER (serverless system), make sure that the DHCP server always assigns the
same IP address to the device.
STATIC
Under [IP ADDRESS] manually assign the address.
The assigned IP address must belong to the same SUBNET as the ROUTER and the other connected devices.
If there is also a DHCP SERVER, the IP address must not be among those included in the DHCP POOL.
Under [NETMASK] type in the NETMASK, where diff erent from the default setting.
Under [GATEWAY] type in the default GATEWAY for the network it belongs to.
Under [DNS] type in a valid address to connect to CAMEConnect.
Tap [SAVE] to save the confi guration.
Advertisement
Table of Contents
