AGT A200
BP1
Description
Internal audio receiver.
Door lock release button
BP1
Cut the jumper fl ush with BP1 to make the
door lock release button (
the handset raised.
Terminal board M1
5 - Earth
7 - Call from entry panel input
8 - Audio FROM entry panel
9 - Audio TO entry panel
503
Technical data
Type
Operating
temperature (°C)
Storage
) active only with
temperature (°C)
IP Rating
Installation
Open the device by pressing on the tab
•
at the bottom
Separate the shell from the bottom of
M1
•
the device.
Fasten the bottom of the device to the
•
box on the wall
The box must be installed at an appro-
priate height for the user. Avoid over-
tightening the screws.
Once all connections have been made,
•
reattach the shell to the bottom of the
device
503
AGT A200
+5 to +40
-25 to +70
IP 30
.
- - .
.