Introduction; General; Warranty; Symbols Used In This Manual And On The System - LEGRAND ecotap Duo Manual

1. INTRODUCTION

Thank you for choosing for an Ecotap® charging station. This manual is regarding the charge point DUO.
This manual contains important information for properly and safely installing and using the charging station.
This charging station is designed for vehicles that are equipped with a mode 3 charging system that complies with IEC 61815-
1 (version 2.0) and a plug system that complies with VDE-AR-E 2623-2-2. Together with the vehicle and system, the charging
station will select the best option for charging the vehicle quickly and safely.
The entire charging station complies with the 2014/35/EU directive dealing with the harmonisation of regulations regarding
electric materials within certain voltage limits (a recast of all previously published versions).
This manual explains how to safely install and use the charging station. This manual was drawn up in such a way as to ensure
the charging station' s maximum functioning and lifespan.
This manual was drawn up with great care. However, should anything remain unclear after reading it, please contact your
supplier before you install the charging station.
We cannot guarantee that this charging station will function properly unless it is installed by an authorised or certified
installer / mechanic.
Read this manual carefully before you install or use the charging station. Save this manual and store it near the station so that
the instructions and safety regulations will always be readily available.
© Copyright
No part of this publication may be copied, reproduced or saved in a retrieval system without Ecotap® B.V. ' s prior written
consent.
This is an English translation of the original Dutch manual.

2. GENERAL

2.1 Warranty

The Ecotap® B.V. General terms and conditions for delivery apply here.
Ecotap® B.V. cannot be held accountable for any injury or damage to goods should the charging station be altered, damaged,
refitted or expanded upon with other components, or not used in accordance with the instructions and conditions set out
here.
2.2 Symbols used in this manual and on the charging system
Symbol Meaning
Pay attention! Important instruction
Electrical hazard
For maintenance: first disconnect the installation from its power supply and test it to make sure there is
no voltage left, before engaging in any maintenance activities
Wear special gloves.
Disconnect the electrical installation from its power supply
3. www.ecotap.nl
11-07-23