Matrox Vidcap Driver; Video Source Settings - Matrox G100 Series User Manual

Matrox VidCap driver

If your Matrox product includes a TV tuner, video capture programs (other than Matrox
PC-VCR Remote) use the Matrox
VidCap driver to adjust settings in a video conferencing program. This section describes VidCap
source and format setting controls.

Video source settings

– Click a button in this group box to select a
Video channel
source:
Note: Your Matrox product doesn't support S-video
line input. Because of this, certain Matrox software
controls are unavailable.
– to capture video from a video camera
Composite video
or video player connected to your Matrox
connector.
– to capture video from your Matrox TV tuner.
TV tuner
Depending on what's connected to your Matrox
buttons:
– for a TV antenna.
Air band
– for cable TV.
Cable band
With the box, select the channel you want to use. Click
Channel
For more information, see "Hardware installation", page
– Click a button in this group box to identify the TV standard used by your video source:
Standard
– for most North American video devices.
NTSC
– for most European video devices.
PAL
– for video devices using the TV video standard from France.
SECAM
The VidCap driver automatically assigns the correct standard used by your current video source.
VidCap won't let you select a TV standard it doesn't detect.
26 Matrox Productiva G100 Multi-Monitor Series – User Guide
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
driver interface. For example, you use the Matrox
VidCap
VIDEO IN
ANT/CABLE
7.
connector, click one of these
to apply your selection.
Set