Table of Contents
Advertisement
Display setup
After checking your monitor software settings, you can change your display resolution, color
palette and other Matrox PowerDesk settings. To access Matrox display property sheets, click
Programs
Matrox PowerDesk NT
resolution or color palette, click the
settings, see the Matrox PowerDesk online guide.
Multi-display setup
To set up a multi-display resolution, click
Display Properties
Settings
display desktop by moving the
Note: In multi-display mode under Windows NT 4.0, the same display settings are used for
each display.
Software overview
Matrox PowerDesk for Windows NT 4.0 includes
Matrox display driver with:
Multi-display support to use up to 4 monitors at a time.
Plug-and-Play (DDC-2B) monitor support.
property sheet to change your display settings. This sheet provides access to Matrox
Settings
PowerDesk features such as:
Desktop mode buttons to set up a proportional, horizontal or vertical virtual desktop.
Desktop mode button to set up a multi-display desktop.
Display schemes to easily switch to a pre-defined display setting.
property sheet to inform the Matrox display driver of your monitor's capabilities.
Monitor
property sheet for information on your display hardware and software.
Information
property sheet to configure advanced driver settings.
Performance
property sheet with settings for:
PowerDesk
to zoom in and pan on your view area.
PixelTOUCH
to center opened windows in your view area.
CenterWINDOW
to maximize windows over the entire desktop or in a single display.
MaxVIEW
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
Matrox Display Properties
tab. For more information on changing your display
Settings
Programs
(
Multi-Display Desktop
slider.
Desktop area
Matrox Productiva G100 Multi-Monitor Series – User Guide
. To change your display
Matrox PowerDesk NT
Matrox
). Change the setup of your multi-
17
Advertisement
Table of Contents
