Table of Contents
Advertisement
24 Chapter 1: Introduction
Standard items
Inspecting the Matrox Solios package
You should check the contents of your Matrox Solios package when you first
open it. If something is missing or damaged, contact your Matrox representative.
With all Matrox Solios packages
You should receive the following item:
• The Matrox Solios eCL, XCL, eA, XA, or GigE board, depending on which was
purchased.
With Matrox Solios eCL/XCL and Matrox Solios eA/XA
You should also receive the following items:
• An adapter board, and a flat ribbon cable to interface the frame grabber with the
adapter board. Note that the Matrox Solios eCL/XCL-B package does not
aupport/include an adapter board or a flat ribbon cable.
• A supplementary 50-pin auxiliary I/O mating connector. The mating connector
is included in case you need to build a cable that can access the signals of the
internal auxiliary I/O connector from within the chassis. Note that the Matrox
Solios eCL/XCL-B package does not include an internal auxiliary connector.
With Matrox Solios GigE
You should also receive the following items:
• An auxiliary I/O adapter bracket, with an attached cable that allows you to
interface the frame grabber with the connector on the bracket.
❖ You should purchase a shielded Cat 5e (or better) cable from the video source
manufacturer or other third parties.
Hide quick links:
Advertisement
Table of Contents
