Table of Contents
Advertisement
Hardware installation
WARNING: Static electricity can severely damage electronic parts. Before touching any
electronic parts, drain the static electricity from your body. You can do this by touching the
metal frame of your computer. When handling a card, hold it by its edges, and avoid touching
its circuitry.
Switch to the standard VGA display driver
1
If you're running Windows 98 on your computer, this step isn't necessary. If you're using
another operating system (for example, Windows NT 4.0), see its documentation for how to
switch to VGA mode.
Open your computer and remove
2
your existing graphics card
Turn off your computer and all
a
peripherals such as your monitor or
printer.
b
Open the computer and remove your
existing graphics card. (If you have a
display adapter built into your computer
motherboard, it should automatically
disable itself after your Matrox card is
installed.)
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
Matrox Productiva G100 Multi-Monitor Series – User Guide
7
Advertisement
Table of Contents
