Matrox Vidcap Driver; Video Source Settings - Matrox Productiva G100 User Manual

Matrox VidCap driver

If your Matrox product includes a TV tuner, video capture programs (other than Matrox
PC-VCR Remote) use the Matrox
VidCap driver to adjust settings in a video conferencing program. This section describes VidCap
source and format setting controls.

Video source settings

– Click a button in this group box to select a
Video channel
source:
Note: Your Matrox product doesn't support S-video
line input. Because of this, certain Matrox software
controls are unavailable.
– to capture video from a video camera
Composite video
or video player connected to your Matrox
connector.
– to capture video from your Matrox TV tuner.
TV tuner
Depending on what's connected to your Matrox
buttons:
– for a TV antenna.
Air band
– for cable TV.
Cable band
With the
Channel
For more information,
– Click a button in this group box to identify the TV standard used by your video source:
Standard
– for most North American video devices.
NTSC
– for most European video devices.
PAL
– for video devices using the TV video standard from France.
SECAM
The VidCap driver automatically assigns the correct standard used by your current video source.
VidCap won't let you select a TV standard it doesn't detect.
26 Matrox Productiva G100 Multi-Monitor Series – User Guide
driver interface. For example, you use the Matrox
VidCap
box, select the channel you want to use. Click
see "Hardware installation", page
VIDEO IN
connector, click one of these
ANT/CABLE
7.
to apply your selection.
Set