Table of Contents
Advertisement
This part introduces the configuration of events. The device takes certain response to triggered
alarm.
8.1 Basic Event
8.1.1 Set Video Tampering Alarm
When the configured area is covered and cannot be monitored normally, the alarm is triggered and
the device takes certain alarm response actions.
Steps
1. Go to Configuration → Event → Basic Event → Video Tampering .
2. Select the channel number.
3. Check Enable.
4. Set the Sensitivity. The higher the value is, the easier to detect the area covering.
5. Click Draw Area and drag the mouse in the live view to draw the area.
Stop Drawing Finish drawing.
Clear All
TandemVu PTZ Camera User Manual
Chapter 8 Event and Alarm
Delete all the drawn areas.
61
Advertisement
Table of Contents
