Set Face Picture Comparison; View Face Comparison Result - HIKVISION TandemVu DS-2SF8C442MXS-DLW-24F0 User Manual

3.5.2 Set Face Picture Comparison

The function compares captured pictures with face pictures in the library and outputs comparison
result. Comparison result can trigger certain actions when arming schedule and linkage method are
set.
Before You Start
You should first create a face picture library and add face pictures. See Set Face Picture Library .
Steps
1. Go to Open Platform → Face Comparison and Modeling .
2. Select Face Picture Comparison.
3. Check Enable Face Picture Comparison.
4. Select a face picture library as the reference.
5. Select desired face information to upload.
6. Select a face comparison mode.
Best
Comparison
Quick
Comparison
7. Set arming schedule. See Set Arming Schedule .
8. Set linkage method. See Linkage Method Settings .

3.5.3 View Face Comparison Result

Steps
1. Go to Application.
2. Set search condition and click Counting.
TandemVu PTZ Camera User Manual
The device captures and compares the target face continuously when the
face target stays in the detection area, and upload the best scored face
picture and related alarm information when the target face leaves the area.
The device capture and compares the target face when the face grading
exceeds the set Face Grading Threshold for Capture.
Face Grading Threshold for Capture
The face grading threshold for the device to judge whether to capture and
upload the face or not.
Max. Capture Interval
The max. interval between two captures when the target is in the
detection area. The camera takes the capture when it reaches the max.
interval even if the face grading does not reach the set threshold.
Quick Setup Mode
Custom, Face Attendance, and Face Recognition are selectable. Select
according to actual using scenarios. In custom mode, you can set
Comparison Timeout and Comparison Times.
19