Table of Contents
Advertisement
6.6 Display Info. on Stream
The information of the objects (e.g. human, vehicle, etc.) is marked in the video stream. You can
set rules on the connected rear-end device or client software to detect the events including line
crossing, intrusion, etc.
Steps
1. Go to the setting page: Configuration → Video/Audio → Display Info. on Stream .
2. Check Enable Dual-VCA.
3. Click Save.
6.7 Display Settings
It offers the parameter settings to adjust image features.
Go to Configuration → Image → Display Settings .
For device that supports multiple channels, display settings of each channel is required. The
settings for different channels may be different. This part introduces all possible parameters among
the channels.
Click Default to restore settings.
6.7.1 Scene Mode
There are several sets of image parameters predefined for different installation environments.
Select a scene according to the actual installation environment to speed up the display settings.
Image Adjustment
By adjusting the Brightness, Saturation, Contrast and Sharpness, the image can be best displayed.
Exposure Settings
Exposure is controlled by the combination of iris, shutter, and gain. You can adjust image effect by
setting exposure parameters.
Exposure Mode
Auto
The iris, shutter, and gain values are adjusted automatically.
You can limit the changing ranges of iris, shutter and gain by setting Max. Iris Limit, Min. Iris
Limit, Max. Shutter Limit, Min. Shutter Limit and Limit Gain for better exposure effect.
TandemVu PTZ Camera User Manual
45
Advertisement
Table of Contents
