Removing The Processor Heatsink Module - Supermicro SuperStorage SSG-6049SP-DE1CR60 User Manual

Removing the Processor Heatsink Module

Before removing the processor heatsink module (PHM) from the motherboard, unplug the
AC power cord from all power supplies after shutting down the system. Then follow the steps
below:
1. Use a T30 Torx-bit screwdriver to loosen the four screws in a backwards sequence of
#4, #3, #2, and #1.
2. Gently lift the PHM upwards to remove it from the socket.
the sequence of 4, 3, 2, 1
#4
#1
Printed Triangle on Motherboard
Chapter 3: Maintenance and Component Installation
Remove the screws in
#2
#3
37
CPU Socket
After removing the screws,
lift the Processor Heatsink
Module off the CPU socket.