Supermicro SuperStorage SSG-6049SP-DE1CR60 User Manual page 97

SATA Device Type (SATA Port 0~ Port 3)
Use this feature to specify if the device installed on the SATA port specified by the user
should be connected to a Solid State drive or a Hard Disk Drive. The options are Hard
Disk Drive and Solid State Drive.
PCH sSATA Configuration
When this submenu is selected, the AMI BIOS automatically detects the presence of the
sSATA devices that are supported by the sSATA controller and displays the following items:
sSATA Controller
This feature enables or disables the onboard SATA controller supported by the Intel PCH
The options are Enable and Disable.
chip
.
Configure sSATA as (Available when sSATA Controller is set to Enable)
Select AHCI to configure a SATA drive specified by the user as an AHCI drive. Select RAID
to configure a SATA drive specified by the user as a RAID drive. The options are AHCI and
RAID. (Note: This feature is hidden when the sSATA Controller item is set to Disabled.)
SATA HDD Unlock (Available when sSATA Controller is set to Enable)
Select Enable to unlock the HDD password in the OS. The options are Disable and Enable.
Aggressive Link Power Management
When this feature is set to Enable, the sSATA AHCI controller manages the power use of the
sSATA link. The controller will put the link in a low power mode during an extended period of
I/O inactivity, and will return the link to an active state when I/O activity resumes. The options
are Disable and Enable.
*If the feature, Configure sSATA as, is set to AHCI, the following features will become
available for user's configuration:
sSATA Port 0~ Port 5
This feature displays the information detected on the installed SATA drive on the particular
SATA port.
•
Model number of drive and capacity
•
Software Preserve Support
97
Chapter 6: UEFI BIOS